[ad_1]
Last updated:
The weather has taken a turn in the country. Due to cold winds, winter has started increasing in many parts of North India. In such a situation, have you started using geyser? If your geyser is heating water late, it needs immediate attention. You can easily solve this problem with the help of some tricks.
Winter has started and geysers have started running in every house. But many people are also worried because the geyser is heating the water for a very long time. Due to this, the electricity bill also increases and the geyser does not work for a long time. Why does this problem arise and how can you solve this problem of geyser? For this you need to know about some smart hacks.
According to the report of Navbharat Times, expert technicians have suggested some methods to overcome this problem. First of all check the heating element. This is the rod that heats water. Over time, minerals in water accumulate in it. Scaling takes place. If a layer builds up, the heat does not reach the water properly. Sometimes the element also gets burnt. If so, call a mechanic and get the element cleaned or you can get a new one installed.
Geyser tank descale service
It is also necessary to get descale service of the geyser tank done. A thick layer of calcium-magnesium also accumulates inside the tank. This creates a wall between water and the elements. Due to this the heat reaches slowly. Get it serviced before the start of every winter. In this, the tank is cleaned with chemicals and after that the water starts heating again rapidly.
check power supply
Also see thermostat. It controls the temperature of the geyser. Many people set it at low level themselves, then it takes time. Correct the settings for this. If the problem still persists then the thermostat may be damaged so get it replaced.
It is very important to check the power supply also because if the voltage is less than 200 then the element does not get full energy. This happens if there is old wiring or there is fluctuation in the area. For this you can apply stabilizer. Due to this the electricity will also remain stable and the geyser will heat quickly. Also, get the wiring and sockets checked.
check water pressure
If water is coming slowly from the tap then the tank in the geyser will also fill slowly. It will take time to heat up. For this, call a plumber and get the pressure rectified. You can use it after getting the pipe cleaned. With all these five tricks, water will heat up in your geyser quickly and this will also save electricity bills.
[ad_2]
