[ad_1]
If you want cool air then you should never put hot water in the cooler.For more cooling, the cooling pad should be soaked beforehand.The grass behind the cooler should not be blocked by any wall.
In the scorching heat, everyone tries to find a way to stay cool. But the weather is so hot that fans, coolers, ACs have all stopped working. Some houses have air conditioners, so there is some relief, but there are many people who cannot afford ACs. But those who have coolers also make some minor mistakes due to which humidity increases in the room. Generally everyone knows that humidity does not keep you cool, rather it bothers you even more, and it causes continuous sweating. So now the question is what should be done so that there is no stickiness in the room and no sweating happens.
Water in cooler- If you use a cooler, it is important to take special care of the water. If you want cool air, you should never put hot water in the cooler. Actually, what happens is that in the summer season, the water in the tank remains hot and we fill the same water through the pipe.
Also read- AC should not become fatal, people make big mistakes in order to save money, that is why it catches fire!
But you should know that if you fill hot water in the cooler, the water that circulates through the grass will remain hot and the fan of the cooler will blow hot and steamy air in the room. This will increase the humidity in the room instead of cooling it down.
For this, one thing you can do is that if you feel that the water is too hot, then if possible put some ice cubes in the cooler tank.
Also read- If the cooler has stopped working, then definitely check these 2 things, it will start blowing cold air, the room will be cool
It is important to pay attention to the grass- The second thing is to ensure that the grass behind the cooler is not blocked by any wall. If this happens, the cooler will not be able to draw air properly. If the backside of the cooler is in an open place, cool air will keep coming into the room.
Another good way to get more cooling is to pre-wet the cooling pad. When you fill the water tank, let the pump run through the cooling pad. This will allow the grass to absorb all the water beforehand. Then, when the tank is full, turn on the cooler and enjoy the cool air.
Tag: technical knowledge, Technology News, Tech Tricks
first published : June 9, 2024, 10:00 IST
[ad_2]
